The pet weighing scale is mainly composed of a weight-bearing system, a high accuracy load cell and a display system. Its main work flow is when the object is placed on the weighing pan, the object pressure is applied to the sensor, the sensor undergoes elastic deformation, so that the impedance changes, and the excitation voltage is used to change at the same time to output a changing analog signal. The signal is amplified by the amplifier circuit and output to the analog-to-digital converter. Converted into a digital signal that is easy to process, output to the CPU arithmetic control. The CPU outputs this result to the display according to keyboard commands and programs, until this result is displayed.

The principle of pet scale is similar to that of an ordinary electronic scale, and basically uses a single point load cell. The appearance of the pet scale has four contact points with the ground. A pressure sensor is placed at the four contact points. The pressure sensor converts the weight of the pet into an electrical signal, which is sampled by the processor AD, and then converted to obtain the pet weight.

The pet scale is used to weigh the animal's weight. The ultra-low scale platform is used to greatly facilitate the up and down progress of the animal weighing. This scale mainly consists of four weight sensor, a scale body, a junction box and a weighing display instrument. Composition, safe landing, accurate and reliable weighing.

More information about our load cell, feel free visit our site: http://www.mavin.cn