The electronic forklift scale is a weighing and measuring instrument for the loading equipment to weigh the loading material during the loading process. Electronic forklift scales can provide accumulated values and printed lists of the material being weighed. Electronic forklift scale is a kind of vehicle-mounted weighing equipment, which is integrated with the mechanical control part of the vehicle and realizes weighing while the vehicle is traveling. It realizes the weighing by converting the hydraulic pressure into the weight of the high capacity load cells in the bucket by monitoring the predetermined weighing position with a proximity switch. It has two different working modes: target mode and accumulation mode. According to the operator's choice, the load can be automatically accumulated or deducted from the target set value.

With the widespread use of electronic forklift scales, more and more people have a clear understanding of this scale, but there are still many users who do not know how to maintain forklift scales. Let's briefly share with the majority of users the maintenance method of the electronic forklift scale.

(1) When the forklift scale is not working, do not place heavy objects on the scale body.

(2) When using it for the first time, use up the pre-stored power before charging, and the first charging will take more than 12 hours.

(3) There will be an undervoltage prompt before the weighing indicator is out of power. At this time, it should be charged immediately to ensure the service life of the battery. The first three times must be fully charged within 10-12 hours to ensure that the battery is fully activated. After each charge, it is sufficient for 4-6 hours. Damage to the battery will affect the normal use of the forklift with its S beam load cell and the stability of the weighing indicator.

(4) Use 220V AC power supply when charging the meter.

(5) When the electronic forklift scale fails, please notify the professionals in time for inspection and sorting. Users are not allowed to disassemble the chassis at will, nor replace the internal parts of S type load cell at will; operators and instrument maintenance personnel must pass special training before they can engage in operation and maintenance.

More information please visit out site : www.mavin.cn